Double coil tines

High elasticity and recovery of the initial geometry

Characteristics:

Special, high elasticity steel with high capacity to recover initial geometry.

Specific integral heat treatment.

Epoxy paint with UVA protection.

Use:

Working in dry (friable) soil is recommended and they are very suitable for seedbed preparation in non-demanding crops (for example, barley and wheat etc).

A maximum working depth of between 15 and 25 cm is recommended

The required power is between 19 and 23 hp/m

Bellota makes double coil tines and double coil spring tines in different profiles that adapt to the work of both the chisel and the semi-chisel. The cultivators equipped with double coil tines can be used for tillage and also to prepare the seed-bed in non-fastidious plant crops such as barley or wheat. In the cultivators for vineyards this type of farm machinery is used a lot and there are special models designed especially for the vines that protect the vine stock.

Epoxy paint with UVA protection.

2483

Download catalogue

20X20

Ref.	G	A	B	C	D	E	G	M	Grs.	B	F	₴
2480 D	20x20	370	395	92	13	45	63	M10	4400	200	12480
2480 I	20x20	370	395	92	13	45	63	M10	4400	200	12480

I Left
D Right
F Articles manufactured upon order.

Clamps. <> [[T:132]]

See possible assemblies on page [[F:104]]

Models specially designed for vineyard

2480

2480V - 2485V

25X25

Ref.	G	A	B	C	D	E	G	M	Grs.	B	F	₴
2481 D	25x25	425	468	120	15	45	79	M12	8950	95	12481
2481 I	25x25	425	468	120	15	45	79	M12	8950	95	12481
2481-B D	25x25	390	468	120	17	60	79	M12	8950	100	12481
2481-B I	25x25	390	468	120	17	60	79	M12	8950	100	12481
2481-H D	25x25	450	395	118	17	33	80	M10	9000	90	12481
2481-H I	25x25	450	395	118	17	33	80	M10	9000	90	12481
2481-FM D	25X25	90	530	130		45/51	95	M12	10000	100	12481
2481-FM I	25X25	90	530	130		45/51	95	M12	10000	100	12481

I Left
D Right
F Articles manufactured upon order.

Clamps. <> [[T:132]]

See possible assemblies on page [[F:104]]

2499 D/I C2A fits with 1529-A6 <> [[T:1297]]

Models specially designed for vineyard

2481-H

Cultivator tines 25x25 Bellota Agrisolutions 2481

2481-FM

2480V - 2485V

27X27

Ref.	G	A	B	C	D	E	G	M	Grs.	B	F	₴
2483 D	27x27	437	480	127	17	45	85	M12	10500	80	12483
2483 I	27x27	437	480	127	17	45	85	M12	10500	80	12483
2483-R22 D	27x27	437	480	127	23	45	85	M12	10500	80	12483 A22
2483-R22 I	27x27	437	480	127	23	45	85	M12	10500	80	12483 A22

I Left
D Right
F Articles manufactured upon order.

Clamps. <> [[T:132]]

See possible assemblies on page [[F:104]]

Models specially designed for vineyard

2483

2480V - 2485V

30X30

Ref.	G	A	B	C	D	E	G	M	Grs.	B	₴
2484 D	30x30	496	498	145	21	45	95	M12	14200	60
2484 I	30x30	496	498	145	21	45	95	M12	14200	60
2484 D GD	30x30	360	625	360	15	45	95	M12	15000	60
2484 I GD	30x30	360	625	360	15	45	95	M12	15000	60

I Left
D Right
F Articles manufactured upon order.

Clamps. <> [[T:132]]

2484 GD: water based painting

See possible assemblies on page [[F:104]]

2484

2484 GD

32X32

Ref.	G	A	B	C	D	E	G	M	Grs.	B	F	₴
2485 D	32x32	438	508	155	23	45	101	M12	17000	50	12485
2485 I	32x32	438	508	155	23	45	101	M12	17000	50	12485

I Left
D Right
F Articles manufactured upon order.

Clamps. <> [[T:132]]

See possible assemblies on page [[F:104]]

Models specially designed for vineyard

2485

2480V - 2485V

35X35

Ref.	G	A	B	C	D	E	G	M	Grs.	B	F	₴
2486 D GD	35x35	400	583	145	23	45/70	110	M12	22000	40	12486
2486 I GD	35x35	400	583	145	23	45/70	110	M12	22000	40	12486
2486 CD GD	35x35	410	600	145	17	50/75	110	M12	22000	40	12486
2486 CI GD	35x35	410	600	145	17	50/75	110	M12	22000	40	12486