Bolts

8.8, 10.9 and 12.9 quality

Characteristics:

Screw quality ensures the following specifications:

8.8: 800 (N/mm2) of traction strength and 640 (N/mm2) elastic limit.

10.9: 1000 (N/mm2) of traction strength and 900 (N/mm2) elastic limit.

12.9: 1200 (N/mm2) of traction strength and 1080 (N/mm2) elastic limit.

Packaged in Bellota boxes.

A specially designed series for Bellota plough parts.

All bolts are supplied with nuts.

Screws are used in all farm machinery. Bellota has a wide range of models and sizes for all kinds of farming equipment. Both in the cultivator section and in the tillage section the recommended Bellota screw reference is stated beside it.

All bolts are supplied with nuts.

1199-A

Download catalogue

1199A COUNTERSUNK HEAD WITH SQUARE NECK

Ref.	A	B	D. s.	Quality	Quality nut	ø D	ø D2	L	₴
1199A-1035	100	800	DIN 608	8.8	.8 (DIN934)	M10	17,5	35
1199A-1035B	100	800	DIN 608	12.9	.10 (DIN934)	M10	17,5	35
1199A-1040	100	800	DIN 608	8.8	.8 (DIN934)	M10	17,5	40
1199A-1050	100	800	DIN 608	8.8	.8 (DIN934)	M10	17,5	50
1199A-1060	100	800	DIN 608	8.8	.8 (DIN934)	M10	17,5	60
1199A-1140	100	800	DIN 608	8.8	.8 (DIN934)	M11	21	40
1199A-1150	100	800	DIN 608	8.8	.8 (DIN934)	M11	21	50
1199A-1160	50	400	DIN 608	8.8	.8 (DIN934)	M11	21	60
1199A-1235	100	800	DIN 608	8.8	.8 (DIN934)	M12	24	35
1199A-1235B	100	800	DIN 608	12.9	.10 (DIN934)	M12	24	35
1199A-1238	100	800	Plano Especial	8.8	.8 (DIN934)	M12	24	38
1199A-1240	50	400	DIN 608	8.8	.8 (DIN934)	M12	24	40
1199A-1240A	50	400	DIN 608	10.9	.10 (DIN934)	M12	24	40
1199A-1248A	50	400	DIN 608	10.9	.10 (DIN934)	M12	24	48
1199A-1250	50	400	DIN 608	8.8	.8 (DIN934)	M12	24	50
1199A-1250B	50	400	DIN 608	12.9	.10 (DIN934)	M12	24	50
1199A-1260	50	400	DIN 608	8.8	.8 (DIN934)	M12	24	60
1199A-1260A	50	400	DIN 608	10.9	.10 (DIN934)	M12	24	60
1199A-1270	50	400	DIN 608	8.8	.8 (DIN934)	M12	24	70
1199A-1270A	50	400	DIN 608	10.9	.10 (DIN934)	M12	24	70
1199A-1280	50	400	DIN 608	8.8	.8 (DIN934)	M12	24	80
1199A-1280A	50	400	DIN 608	10.9	.10 (DIN934)	M12	24	80
1199A-1285A	50	400	DIN 608	10.9	.10 (DIN934)	M12	24	85
1199A-1285B	50	400	DIN 608	12.9	.10 (DIN934)	M12	24	85
1199A-1290	50	400	DIN 608	8.8	.8 (DIN934)	M12	24	90
1199A-1290B	50	400	DIN 608	12.9	.10 (DIN934)	M12	24	90
1199A-1440	50	400	DIN 608	8.8	.8 (DIN934)	M14	28	40
1199A-1450	50	400	DIN 608	8.8	.8 (DIN934)	M14	28	50
1199A-1480	25	200	DIN 608	8.8	.8 (DIN934)	M14	28	80
1199A-1650	25	200	DIN 608	8.8	.8 (DINj934)	M16	29	50

F Articles manufactured upon order.

KIT2546C2A consisting of a bolt, a self-locking nut with a DIN 6927 flange and a support washer for the DIN9021 nut (Ø 13 x Ø 37 x 3)

1199-A

1199B COUNTERSUNK HEAD WITH TWO NIBS

Ref.	A	B	D. s.	Quality	Quality nut	ø D	ø D2	L	₴
1199B-1035	100	800	NF (E 27-355)	8.8	.8 (DIN934)	M10	16	35
1199B-1040	100	800	NF (E 27-355)	8.8	.8 (DIN934)	M10	16	40
1199B-1050	100	800	NF (E 27-355)	8.8	.8 (DIN934)	M10	16	50
1199B-1230	100	800	NF (E 27-355)	8.8	.8 (DIN 934)	M12	20	30
1199B-1235	100	800	NF (E 27-355)	8.8	.8 (DIN934)	M12	20	35
1199B-1240	50	400	NF (E 27-355)	8.8	.8 (DIN 934)	M12	20	40
1199B-1240B	50	400	NF (E 27-355)	12.9	.10 (DIN934)	M12	20	40
1199B-1245	50	400	NF (E 27-355)	8.8	.8 (DIN 934)	M12	20	45
1199B-1435	50	400	NF (E 27-355)	8.8	.8 (DIN 934)	M14	24	35
1199B-1440	50	400	NF (E 27-355)	8.8	.8 (DIN 934)	M14	24	40
1199B-1440AESP	50	400		10.9	.10 (DIN934)	M14	22	40
1199B-1655	25	200	NF (E 27-355)	8.8	.8 (DIN 934)	M16	28	55

F Articles manufactured upon order.

1199-B

1199C CONICAL HEAD WITH ONE FLAT

Ref.	A	B	D. s.	Quality	Quality nut	ø D	ø D2	L	₴
1199C-1433	50	400	KN 48.03	12.9	.10 (DIN934)	M14	18	33
1199C-1437	50	400	KN 48.03	12.9	.10 (DIN934)	M14	18	37
1199C-1442	50	400	KN 48.03	12.9	.10 (DIN934)	M14	18	42
1199C-1640	25	200	KN.48.03	12.9	.10 (DIN934)	M16	21	40
1199C-1650	25	200	KN 48.03	12.9	.10 (DIN934)	M16	21	50
1199C-1670	25	200	KN 48.03	12.9	.10 (DIN934)	M16	21	70
1199C-1685	25	200	Din 934	12,9	.10 (DIN934)	M16	21	85

F Articles manufactured upon order.

1199-C

1199D CONICAL HEAD WITH TWO FLATS

Ref.	A	B	D. s.	Quality	Quality nut	ø D	ø D2	L	₴
1199D-1233	100	800	KN 48.03	12.9	.10 (DIN934)	M12	16	33
1199D-1237	100	800	KN 48.03	12.9	.10 (DIN934)	M12	16	37
1199D-1242	100	800	KN 48.03	12.9	.10 (DIN934)	M12	16	42
1199D-1250	100	800	KN 48.03	12.9	.10 (DIN934)	M12	16	50
1199D-1255	50	400	KN 48.03	12.9	.10 (DIN934)	M12	16	55
1199D-1434	50	400	KN 48.03	12.9	.10 (DIN934)	M14	18	34
1199D-1445	50	400	KN 48.03	12.9	.10 (DIN934)	M14	18	45
1199E-1238	100	800	KN 48.03	12.9	.8 (DIN934)	M1/2"	17,5	38

F Articles manufactured upon order.

1199D

1199O CONICAL HEAD WITH SQUARE NECK

Ref.	A	B	D. s.	Quality	Quality nut	ø D	ø D2	ø D3	L	₴
1199O-1040	100	800	ISO 5713	8.8	.8 (DIN934)	M10	18	15,5	40
1199O-1040TS	100	800	ISO 5713	8.8	.8 (DIN985)	M10	18	15,5	40
1199O-1045	100	800	ISO 5713	8.8	.8 (DIN934)	M10	18	15,5	45
1199O-1045TS	100	800	ISO 5713	8.8	.8 (DIN985)	M10	18	15,5	45
1199O-1045TCB	100	800	ISO 5713	8.8	.10 (DIN6927)	M10	18	15,5	45
1199O-1050	100	800	ISO 5713	8.8	.8 (DIN934)	M10	18	15,5	50
1199O-1055A	100	800	ISO 5713	10.9	.10 (DIN934)	M10	18	15,5	55
1199O-1060	100	800	ISO 5713	8.8	.8 (DIN934)	M10	18	15,5	60
1199O-1060TCB	100	800	ISO 5713	8.8	.10 (DIN6927)	M10	18	15,5	60
1199O-1245TCB	50	400	ISO 5713	8.8	.10 (DIN6927)	M12	22	19,5	45
1199O-1250	50	400	ISO 5713	8.8	.8 (DIN934)	M12	22	19,5	50
1199O-1250TS	50	400	ISO 5713	8.8	.8 (DIN985)	M12	22	19,5	50
1199O-1260	50	400	ISO 5713	8.8	.8 (DIN934)	M12	22	19,5	60
1199O-1260TCB	50	400	ISO 5713	8.8	.10 (DIN6927)	M12	22	19,5	60

F Articles manufactured upon order.

1199-O

1199G ROUND HEAD WITH SQUARE NECK

Ref.	A	B	D. s.	Quality	Quality nut	ø D	ø D2	L	₴
1199G-1035	50	400	DIN 603	8.8	.8 (DIN934)	M10	25	35
1199G-1230	50	400	DIN 603	8.8	.8 (DIN934)	M12	30	30
1199G-1235	50	400	DIN 603	10.9	.10 (DIN934)	M12	30	35
1199G-1235B	50	400	DIN 603	12.9	.10 (DIN934)	M12	30	35
1199G-1238	50	400	DIN 603	8.8	.8 (DIN934)	M12	30	38
1199G-1260	50	400	DIN 603	8.8	.8 (DIN934)	M12	30	60
1199G-1470B	50	400	DIN 603	12.9	.10 (DIN934)	M14	32	70
1199G-1480B	50	400	DIN 603	12.9	.10 (DIN934)	M14	32	80